Re: Re: Lunatix 4.3a is running at 300 baud or slower! help!
By: codefenix to Rixter on Fri Oct 25 2024 05:21 pm

You can get this door in the lunat43a.zip file. I can get the door to run on the BBS but it runs at 300 baud for some reason. Very slow. It can take 5 minutes to get to the start menu....

In case you're still having problems with this door, check out this page:

https://shadowscope.com/2012/12/05/lunatix-netfoss-and-sbbs/

This blog post explains how to use netfoss to run the door at full speed. It from 2012 but all the info is still relevant. I've been using the same metho on my Sync board for a few years now, as do other sysops.

Hope it helps.

Ú codefenix - dawnCHAOTIC
³ telnet://conchaos.synchro.net:2300
³ ssh://conchaos.synchro.net:2200

... Do device drivers need a chauffeur's license?

thank you Sir, I will try it. Have a good day.
--- SBBSecho 3.20-Linux
* Origin: Vertrauen - [vert/cvs/bbs].synchro.net (21:1/183)

You can get this door in the lunat43a.zip file. I can get the door to run on the BBS but it runs at 300 baud for some reason. Very slow. It can take 5 minutes to get to the start menu. I can play it fine on BBSLINK and other BBS's. I have a friend that got it to work through DOSBOX-X just beautifully. I am curious to understand why it runs so slow on my BBS I am running synchronet 3.19b. I am running synchronet bbs on a 64 bit windows 10 computer operating with NTVDMX64. I am also curious to understand dosbox-x more and can I run it with NTVDMX64 operating at the same time? If anyone has any tips I would greatly appreciate it. I have access to the door game through BBSLINK but I prefer to run my own for the challenge of setting it up and watching it run. It is a fun game. I enjoyed the challenged of ThunderCat V3.30 and the door file solution. I would love to find out why this one runs so slow on my BBS. I tried different door drop file types, playing the the cts/rts , fossil no fossil options and locked rates, to no effect. I must be missing an obvious combination. I have never had a door asking me to set up cts/rts and the 8n1 7e1 options before and the other settings for port numbers were new to me as well. Thanks guys let me know. Have a good day.

Ricky

telnet://ricksbbs.synchro.net:23
http://ricksbbs.synchro.net:8080
Madison,NC
--- SBBSecho 3.14-Win32
* Origin: Ricks BBS - ricksbbs.synchro.net (21:1/242)

When I saw 8n1 in your post it caused me to think about MS-DOS 5.0 settings on a 80486 computer.
Ed
--- SBBSecho 3.20-Linux
* Origin: capitolcityonline.net * Telnet/SSH:2022/HTTP (21:1/175)

Re: Re: Lunatix 4.3a is running at 300 baud or slower! help!
By: Rixter to codefenix on Sat Oct 26 2024 10:23 am

Re: Re: Lunatix 4.3a is running at 300 baud or slower! help!
By: codefenix to Rixter on Fri Oct 25 2024 05:21 pm

You can get this door in the lunat43a.zip file. I can get the door t run on the BBS but it runs at 300 baud for some reason. Very slow. I can take 5 minutes to get to the start menu....

In case you're still having problems with this door, check out this page:

https://shadowscope.com/2012/12/05/lunatix-netfoss-and-sbbs/

This blog post explains how to use netfoss to run the door at full speed.

from 2012 but all the info is still relevant. I've been using the same

metho > on my Sync board for a few years now, as do other sysops.

Hope it helps.

Ú codefenix - dawnCHAOTIC
³ telnet://conchaos.synchro.net:2300
³ ssh://conchaos.synchro.net:2200

... Do device drivers need a chauffeur's license?

thank you Sir, I will try it. Have a good day.

cj from cjs place bbs helped me adjust netfoss and it works great. thank you very much.

rixter - sysop ricksbbs.synchro.net:23
--- SBBSecho 3.20-Linux
* Origin: Vertrauen - [vert/cvs/bbs].synchro.net (21:1/183)

Re: Lunatix 4.3a is running at 300 baud or slower! help!
By: Ed Vance to Rixter on Sat Oct 26 2024 12:32 pm

You can get this door in the lunat43a.zip file. I can get the door to run the BBS but it runs at 300 baud for some reason. Very slow. It can take 5 minutes to get to the start menu. I can play it fine on BBSLINK and other BBS's. I have a friend that got it to work through DOSBOX-X just beautiful I am curious to understand why it runs so slow on my BBS I am running synchronet 3.19b. I am running synchronet bbs on a 64 bit windows 10 compu operating with NTVDMX64. I am also curious to understand dosbox-x more and can I run it with NTVDMX64 operating at the same time? If anyone has any t I would greatly appreciate it. I have access to the door game through BBSL but I prefer to run my own for the challenge of setting it up and watching run. It is a fun game. I enjoyed the challenged of ThunderCat V3.30 and t door file solution. I would love to find out why this one runs so slow on BBS. I tried different door drop file types, playing the the cts/rts , fos no fossil options and locked rates, to no effect. I must be missing an obvious combination. I have never had a door asking me to set up cts/rts a the 8n1 7e1 options before and the other settings for port numbers were ne to me as well. Thanks guys let me know. Have a good day.

Ricky

telnet://ricksbbs.synchro.net:23
http://ricksbbs.synchro.net:8080
Madison,NC
--- SBBSecho 3.14-Win32
* Origin: Ricks BBS - ricksbbs.synchro.net (21:1/242)

When I saw 8n1 in your post it caused me to think about MS-DOS 5.0 settings a 80486 computer.
Ed

as it turns out lunatix 4.3 does not like synchronets built in fossil driver. netfoss works great. have a great weekend Sir.

-rixter
--- SBBSecho 3.20-Linux
* Origin: Vertrauen - [vert/cvs/bbs].synchro.net (21:1/183)

Re: Lunatix 4.3a is running at 300 baud or slower! help!
By: Ed Vance to Rixter on Sat Oct 26 2024 12:32 pm

as it turns out lunatix 4.3 does not like synchronets built in fossil driver. netfoss works great. have a great weekend Sir.

-rixter
--- SBBSecho 3.20-Linux
* Origin: Vertrauen - [vert/cvs/bbs].synchro.net (21:1/183)

I carry My "weakend" on top of My shoulders.
It's called My Head.
Ed
--- SBBSecho 3.20-Linux
* Origin: capitolcityonline.net * Telnet/SSH:2022/HTTP (21:1/175)