I've responded to this from my WildCat board, but I also received this in my PCBoard bbs and want to respond again to see if it gets out there.

Still interested in that txt file.

--- PCBoard (R) v15.4/250 Beta
* Origin: PCB Prison Board, Mesquite. Tx (1:124/5015)

Trying to setup Netmail in my PCBoard bbs. Does someone have a doc RF>

or txt file that explains how to do this?

I have a text file describing the entire Fidonet configuration, incl. Netmail, for PCBoard. In uncompressed state it's 44+Kb.

Have a nice day,

Holger

Trying a response from the PCBoard Prison Board to see if you get this. Am receiving but don't see any I sent from here.

Do you know a Mario Mueller, he wrote a ppe on door menu system I would li,e
to register. Just thought I would ask

--- PCBoard (R) v15.4/250 Beta
* Origin: PCB Prison Board, Mesquite. Tx (1:124/5015)

Do you have your echos/conferences set up properly, and set to Fido? Are you using the built in Fido mailer, or something else? Intermail does PCB natively.

Using IRex with the built in Fido mailer. I have conferences set to 5 and I have addded my uplink in the user database and have an R next to each confernce.

--- PCBoard (R) v15.4/250 Beta
* Origin: PCB Prison Board, Mesquite. Tx (1:124/5015)

It may be possible. Just not from the oringial author. He sold it. Right now I dont remember who purchased the code. He never did anything with it.

I just wish I could get echo msgs going out with PCBoard. Like I said no trouble getting it in.
Well if You think of anything please let me know.

The built in fido tosser should extract the mail packets. Irex should be able to do the mailing using binkd. It will do either binkley (BSO) style or arc attach style like PCB uses. Unless you have more then two downlinks, it is free.

I have a registered version of IRex. I got PCB to send out echo mail. This message should have tag line from this bbs.

It it keeps working I won't have to worry about any changes to the mail system like getting Intermail, etc.

--- PCBoard (R) v15.4/250 Beta
* Origin: PCB Prison Board, Mesquite. Tx (1:124/5015)

Any questions??

First, get a mail-/QWK-reader. MultiMail is a FREE and decent QWK reader available for most operating systems. Instead of the built-in editor I would recommend the old Windows "EDIT.COM" or the "The Semware Editor" (TSE4JR.ZIP), formerly QEdit, though not free and I think awailable also for Windows.

Then create a directory for the incoming/outgoing mail.

Then, by issuing the command "qw d" at a PCB command promt from SYSOP-.., download a QWK packet that will contain messages from the areas you have subscribed to. PCB will ask where to put the downloaded mail packet.
You must get your mail-/QWK-reader to pull in the messages from the QWK- packet you have downloaded. That is specified in the setup of the mail program.

Your reply or originating messages will be packed into a QWK packet to the same directory as the received mail.

Then, when finished, go to a PCB command prompt from SYSOP-.. and issue the command, "qw u". PCB will ask for the directory of the packet and will then import it for further distribution to your host.

Next time you pull in a qwk packet from you host, you will also receive copies of your sent messages.

Any questions??

No and many thanks. I do have paid for qedit program and I use that always as an editor.

--- PCBoard (R) v15.4/250 Beta
* Origin: PCB Prison Board, Mesquite. Tx (1:124/5015)