Hello everybody!

What do most of you use to toss mail to PCBoard? the internal tosser in 15.4 or something else?


Matt


--- GoldED+/W32-MSVC 1.1.5-b20180707
* Origin: Inland Utopia Mail Center (1:218/109)

What do most of you use to toss mail to PCBoard? the internal tosser
in 15.4 or something else?

I use qfront.

--- QScan/PCB v1.20a / 01-0462
* Origin: Christian Fellowship | cfbbs.no-ip.com 856-933-7096 (1:266/512)

|10On 25 Nov 2022, Matt Munson said the following...|10

Hello everybody!

What do most of you use to toss mail to PCBoard? the internal tosser in 15.4 or something else?

I use Irex to get the packets and the internal tosser of 15,4 to toss the mail.

Ruben Figueroa aka Zazz
Mystic Prison Board Sysop
telnet://pbmystic.rdfig.net:24
Web: www.rdfig.net

--- Mystic BBS v1.12 A48 2022/07/15 (Windows/32)
* Origin: Mystic Prison*Mesquite Tx*pbmystic.rdfig.net:24 (1:124/5014)

What do most of you use to toss mail to PCBoard? the internal tosser
in 15.4 or something else?

I use qfront.

--- QScan/PCB v1.20a / 01-0462
* Origin: Christian Fellowship | cfbbs.no-ip.com 856-933-7096
(1:266/512)

I use the PCB v15.4 internal topser. How difficult is qfront to
configure? Is there a conversion tool I could use?

--- PCBoard (R) v15.4/250 Beta
* Origin: PCB Prison Board, Mesquite. Tx (1:124/5015)

I use the PCB v15.4 internal topser. How difficult is qfront to
configure? Is there a conversion tool I could use?

Not that difficult. Not sure about conversion tools. Qfront for PCB
works as a front end mailer and tosser is designed to work with PCB
message bases with out having to convert message base formats.

--- QScan/PCB v1.20a / 01-0462
* Origin: Christian Fellowship | cfbbs.no-ip.com 856-933-7096 (1:266/512)

|10On 02 Dec 2022, Michael Luko said the following...|10

I use the PCB v15.4 internal topser. How difficult is qfront to configure? Is there a conversion tool I could use?

Not that difficult. Not sure about conversion tools. Qfront for PCB
works as a front end mailer and tosser is designed to work with PCB message bases with out having to convert message base formats.

--- QScan/PCB v1.20a / 01-0462
* Origin: Christian Fellowship | cfbbs.no-ip.com 856-933-7096

Thanks for the reply I will check into it.

What is your opinion of Qfront?

Ruben Figueroa aka Zazz
Mystic Prison Board Sysop
telnet://pbmystic.rdfig.net:24
Web: www.rdfig.net

--- Mystic BBS v1.12 A48 2022/07/15 (Windows/32)
* Origin: Mystic Prison*Mesquite Tx*pbmystic.rdfig.net:24 (1:124/5014)

What is your opinion of Qfront?

I like it. Never had any issues with it. I have version 1.20 final
release with key generator from the author in my bbs file directories.

QFP-120.ZIP 971892 02/09/06 Wide beta version 1.20a of QFront/PCB,
a full-featured FidoNet mailer for PCBoard. This is the complete
installation or upgrade package. Now includes key generator direct
from the author! FREEWARE! Released 10-25-2000.

--- QScan/PCB v1.20a / 01-0462
* Origin: Christian Fellowship | cfbbs.no-ip.com 856-933-7096 (1:266/512)

I use the PCB v15.4 internal topser. How difficult is qfront to
configure? Is there a conversion tool I could use?

Not that difficult. Not sure about conversion tools. Qfront for PCB
works as a front end mailer and tosser is designed to work with PCB

I use the PCB v15.4 internal topser. How difficult is qfront to
configure? Is there a conversion tool I could use?

Not that difficult. Not sure about conversion tools. Qfront for PCB

ok, I will play with it. How well does it work for you and anything I
need to know to set it up? Like does it answer a bonkp or do I need
somethint ahead of it?

--- PCBoard (R) v15.4/250 Beta
* Origin: PCB Prison Board, Mesquite. Tx (1:124/5015)

What is your opinion of Qfront?

I like it. Never had any issues with it. I have version 1.20 final release with key generator from the author in my bbs file directories.
QFP-120.ZIP 971892 02/09/06 Wide beta version 1.20a of QFront/PCB, a full-featured FidoNet mailer for PCBoard. This is the complete installation or upgrade package. Now includes key generator direct from the author! FREEWARE! Released 10-25-2000.

Doesn't Qfront require a comport? How do you have it setup for a telnet connection?

my email is rdfigueroa@gmail.com if you want to correspond that way

--- QScan/PCB v1.20a / 01-0462
* Origin: Christian Fellowship | cfbbs.no-ip.com 856-933-7096 (1:266/512)

Doesn't Qfront require a comport? How do you have it setup for a
telnet connection?

I use Com/IP on my telnet nodes. I know other pcb sysop using netfoss to simulate comport over internet connection.

--- QScan/PCB v1.20a / 01-0462
* Origin: Christian Fellowship | cfbbs.no-ip.com 856-933-7096 (1:266/512)

ok, I will play with it. How well does it work for you and anything
I need to know to set it up? Like does it answer a bonkp or do I
need somethint ahead of it?

I use Irex for binkp and FTP transport.

--- QScan/PCB v1.20a / 01-0462
* Origin: Christian Fellowship | cfbbs.no-ip.com 856-933-7096 (1:266/512)

|10On 07 Dec 2022, Michael Luko said the following...|10

Doesn't Qfront require a comport? How do you have it setup for a telnet connection?

I use Com/IP on my telnet nodes. I know other pcb sysop using netfoss to simulate comport over internet connection.

Well I don't have COM\IP but I do have Netserial which emulate a comport. I'll try that.

Ruben Figueroa aka Zazz
Mystic Prison Board Sysop
telnet://pbmystic.rdfig.net:24
Web: www.rdfig.net

--- Mystic BBS v1.12 A48 2022/07/15 (Windows/32)
* Origin: Mystic Prison*Mesquite Tx*pbmystic.rdfig.net:24 (1:124/5014)

|10On 07 Dec 2022, Michael Luko said the following...|10

Doesn't Qfront require a comport? How do you have it setup for a telnet connection?

I use Com/IP on my telnet nodes. I know other pcb sysop using netfoss to simulate comport over internet connection.

I have and have netfoss working with my PCB bbs. Not sure about netfoss emulating a comport. I will check into it

Ruben Figueroa aka Zazz
Mystic Prison Board Sysop
telnet://pbmystic.rdfig.net:24
Web: www.rdfig.net

--- Mystic BBS v1.12 A48 2022/07/15 (Windows/32)
* Origin: Mystic Prison*Mesquite Tx*pbmystic.rdfig.net:24 (1:124/5014)

|10On 07 Dec 2022, Michael Luko said the following...|10

ok, I will play with it. How well does it work for you and anything
I need to know to set it up? Like does it answer a bonkp or do I
need somethint ahead of it?

I use Irex for binkp and FTP transport.

I can do that

Ruben Figueroa aka Zazz
Mystic Prison Board Sysop
telnet://pbmystic.rdfig.net:24
Web: www.rdfig.net

--- Mystic BBS v1.12 A48 2022/07/15 (Windows/32)
* Origin: Mystic Prison*Mesquite Tx*pbmystic.rdfig.net:24 (1:124/5014)

I have and have netfoss working with my PCB bbs. Not sure about
netfoss emulating a comport. I will check into it

Netfoss is works with the doors over telnet. Netserial is the port
redirector I belive. Been a while since I have looked into them. I still
have the older multinode license of Com/IP before they went to one node
licence of 99 dollars per node. I got it back when they offered a sysop special.

--- QScan/PCB v1.20a / 01-0462
* Origin: Christian Fellowship | cfbbs.no-ip.com 856-933-7096 (1:266/512)

I use the PCB v15.4 internal topser. How difficult is qfront to
configure? Is there a conversion tool I could use?

Not that difficult. Not sure about conversion tools. Qfront for PCB
works as a front end mailer and tosser is designed to work with PCB
message bases with out having to convert message base formats.

--- QScan/PCB v1.20a / 01-0462
* Origin: Christian Fellowship | cfbbs.no-ip.com 856-933-7096
(1:266/512)

Well I installed it and it looks for comport? How do you make it work
for a telnet connection?

If you rather discuss thus over email, my email is
rdfigueroa@gmail.com

--- PCBoard (R) v15.4/250 Beta
* Origin: PCB Prison Board, Mesquite. Tx (1:124/5015)

Hello Zazz,

07 Dec 22 17:12, you wrote to Michael Luko:

I use the PCB v15.4 internal topser. How difficult is qfront to configure? Is there a conversion tool I could use?

Not that difficult. Not sure about conversion tools. Qfront for PCB works as a front end mailer and tosser is designed to work with PCB message bases with out having to convert message base formats.

--- QScan/PCB v1.20a / 01-0462
* Origin: Christian Fellowship | cfbbs.no-ip.com 856-933-7096 (1:266/512)

Well I installed it and it looks for comport? How do you make it work
for a telnet connection?

If you rather discuss thus over email, my email is
rdfigueroa@gmail.com

pls don't switch to email, i am interested in this conversation ;)

Regards,
--
dp

telnet://bbs.roonsbbs.hu:1212 <<=-

... 10:35pm up 22 days, 16:56:21, load: 87 processes, 293 threads.
--- GoldED/2 1.1.4.7+EMX
* Origin: Roon's BBS - Budapest, HUNGARY (2:371/52)

|10On 10 Dec 2022, Daniel Path said the following...|10

Hello Zazz,

07 Dec 22 17:12, you wrote to Michael Luko:

I use the PCB v15.4 internal topser. How difficult is qfront to configure? Is there a conversion tool I could use?

Not that difficult. Not sure about conversion tools. Qfront for PCB works as a front end mailer and tosser is designed to work with PCB message bases with out having to convert message base formats.

--- QScan/PCB v1.20a / 01-0462
* Origin: Christian Fellowship | cfbbs.no-ip.com 856-933-7096 (1:266/512)

Well I installed it and it looks for comport? How do you make it work for a telnet connection?

If you rather discuss thus over email, my email is rdfigueroa@gmail.com

pls don't switch to email, i am interested in this conversation ;)

Regards,
--
dp

telnet://bbs.roonsbbs.hu:1212 <<=-

Got ya

Ruben Figueroa aka Zazz
Mystic Prison Board Sysop
telnet://pbmystic.rdfig.net:24
Web: www.rdfig.net

--- Mystic BBS v1.12 A48 2022/07/15 (Windows/32)
* Origin: Mystic Prison*Mesquite Tx*pbmystic.rdfig.net:24 (1:124/5014)

Hello Zazz!

Wednesday December 07 2022 17:12, you wrote to Michael Luko:

If you rather discuss thus over email, my email is
rdfigueroa@gmail.com

I too join in with a request to keep the discussion here, please.

THNX

Martin

--- FMail-W32 2.0.1.4
* Origin: Aleco Experience BBS * Prague * [bbs.alecoexp.cz] (2:423/120)

|10On 11 Dec 2022, Martin Ruzicka said the following...|10

Hello Zazz!

Wednesday December 07 2022 17:12, you wrote to Michael Luko:

If you rather discuss thus over email, my email is rdfigueroa@gmail.com

I too join in with a request to keep the discussion here, please.

THNX

Will do

Ruben Figueroa aka Zazz
Mystic Prison Board Sysop
telnet://pbmystic.rdfig.net:24
Web: www.rdfig.net

--- Mystic BBS v1.12 A48 2022/07/15 (Windows/32)
* Origin: Mystic Prison*Mesquite Tx*pbmystic.rdfig.net:24 (1:124/5014)

I use the PCB v15.4 internal topser. How difficult is qfront

to Z> -> configure? Is there a conversion tool I could use? Z> -> Z>

Not that difficult. Not sure about conversion tools. Qfront for

PCB Z> -> works as a front end mailer and tosser is designed to work
with PCB Z> -> message bases with out having to convert message base formats. Z> -> Z> -> --- QScan/PCB v1.20a / 01-0462 Z> -> * Origin: Christian Fellowship | cfbbs.no-ip.com 856-933-7096 Z> -> (1:266/512)

Well I installed it and it looks for comport? How do you make it

work Z> for a telnet connection?

If you rather discuss thus over email, my email is Z>

rdfigueroa@gmail.com
pls don't switch to email, i am interested in this conversation ;)
Regards,
--
dp

Ok, I will keep posting here.

--- PCBoard (R) v15.4/250 Beta
* Origin: PCB Prison Board, Mesquite. Tx (1:124/5015)

|10On 07 Dec 2022, Michael Luko said the following...|10

Doesn't Qfront require a comport? How do you have it setup for a telnet connection?

I use Com/IP on my telnet nodes. I know other pcb sysop using netfoss to simulate comport over internet connection.

do to need netfpss to run your doors that require a fossil or do you use something else?

Ruben Figueroa aka Zazz
Mystic Prison Board Sysop
telnet://pbmystic.rdfig.net:24
Web: www.rdfig.net

--- Mystic BBS v1.12 A48 2022/07/15 (Windows/32)
* Origin: Mystic Prison*Mesquite Tx*pbmystic.rdfig.net:24 (1:124/5014)

do to need netfpss to run your doors that require a fossil or do you
use something else?

I am using Winfoss for NT. Netfoss should work.

--- QScan/PCB v1.20a / 01-0462
* Origin: Christian Fellowship | cfbbs.no-ip.com 856-933-7096 (1:266/512)

|10On 17 Dec 2022, Michael Luko said the following...|10

do to need netfpss to run your doors that require a fossil or do you use something else?

I am using Winfoss for NT. Netfoss should work.

--- QScan/PCB v1.20a / 01-0462
* Origin: Christian Fellowship | cfbbs.no-ip.com 856-933-7096
(1:266/512)

Your bbs seems to be down as it connects and immediately disconnects me.

Ruben Figueroa aka Zazz
Mystic Prison Board Sysop
telnet://pbmystic.rdfig.net:24
Web: www.rdfig.net

--- Mystic BBS v1.12 A48 2022/07/15 (Windows/32)
* Origin: Mystic Prison*Mesquite Tx*pbmystic.rdfig.net:24 (1:124/5014)

|10On 17 Dec 2022, Michael Luko said the following...|10

do to need netfpss to run your doors that require a fossil or do you use something else?

I am using Winfoss for NT. Netfoss should work.

--- QScan/PCB v1.20a / 01-0462
* Origin: Christian Fellowship | cfbbs.no-ip.com 856-933-7096
(1:266/512)

I found Winfoss but it requires registration. Is there a release for it>

Ruben Figueroa aka Zazz
Mystic Prison Board Sysop
telnet://pbmystic.rdfig.net:24
Web: www.rdfig.net

--- Mystic BBS v1.12 A48 2022/07/15 (Windows/32)
* Origin: Mystic Prison*Mesquite Tx*pbmystic.rdfig.net:24 (1:124/5014)

As I said I am trying to setup Qfront with netserial. If You want to see what happens when you connect please telnet to
pbmystic.rdfig.net:3141

--- QScan/PCB v1.20a / 01-0462
* Origin: Christian Fellowship | cfbbs.no-ip.com 856-933-7096 (1:266/512)

As I said I am trying to setup Qfront with netserial. If You want to
see what happens when you connect please telnet to
pbmystic.rdfig.net:3141

Will have to try later when I get home.

--- QScan/PCB v1.20a / 01-0462
* Origin: Christian Fellowship | cfbbs.no-ip.com 856-933-7096 (1:266/512)

Your bbs seems to be down as it connects and immediately disconnects
me.

Could have been ealier when I was doing updates which required
rebooting. I am telneting in now and had no issues. Will check things
when I get home later tonight.

--- QScan/PCB v1.20a / 01-0462
* Origin: Christian Fellowship | cfbbs.no-ip.com 856-933-7096 (1:266/512)

I found Winfoss but it requires registration. Is there a release for

Not that I am aware. I think it should work unregistered. You just have
to deal with the registation nag. Have you tried netfoss which I belive
is free.

--- QScan/PCB v1.20a / 01-0462
* Origin: Christian Fellowship | cfbbs.no-ip.com 856-933-7096 (1:266/512)

Your bbs seems to be down as it connects and immediately disconnects
me.

Could have been ealier when I was doing updates which required
rebooting. I am telneting in now and had no issues. Will check things
when I get home later tonight.

I got on
--- Platinum Xpress/Win/WINServer v7.0
* Origin: WildCat Prison BBS, Mesquite Tx (1:124/5013)

Re: Re: Fidonet tosser
By: Michael Luko to Ruben Figueroa on Sun Dec 18 2022 06:20 pm

I found Winfoss but it requires registration. Is there a release for

Not that I am aware. I think it should work unregistered. You just have
to deal with the registation nag. Have you tried netfoss which I belive
is free.

Synchronet Virtual DOS Modem is also free (and open source): https://wiki.synchro.net/util:svdm
--
digital man (rob)

Breaking Bad quote #3:
Please tell me: how much is enough? How big does this pile have to be? - Skyler Norco, CA WX: 57.3øF, 67.0% humidity, 0 mph NNE wind, 0.00 inches rain/24hrs --- SBBSecho 3.20-Linux
* Origin: Vertrauen - [vert/cvs/bbs].synchro.net (1:103/705)

I uploaded qf.zip to your bbs. It contains my bat files for qfront. Please take a look.

Also I played with starter.bat and bot qfront to answer. As a dummy with no fossil loaded I tried a game and I got dumped. Now when I try it again I get PCBOARD unexpected message and no connection.

Well I typed pcboard.exe and try again and get connected. But No connection when I try again. Just same PCBoard message unexpected message.

Any thoughts?

Ruben Figueroa aka Zazz
Mystic Prison Board Sysop
telnet://pbmystic.rdfig.net:24
Web: www.rdfig.net

--- Mystic BBS v1.12 A48 2022/07/15 (Windows/32)
* Origin: Mystic Prison*Mesquite Tx*pbmystic.rdfig.net:24 (1:124/5014)

when I try again. Just same PCBoard message unexpected message.

Are you getting this message from qfront or pcboad?

--- QScan/PCB v1.20a / 01-0462
* Origin: Christian Fellowship | cfbbs.no-ip.com 856-933-7096 (1:266/512)

when I try again. Just same PCBoard message unexpected message.

Are you getting this message from qfront or pcboad?

I see this message when I use qfront to connect. It sees the connect and then tries to pass onto PCBoard. But I get the PCBOARD unexpected message. Remember I broke it when I once conneced to qfront and later after looking at messages. I tried a game with no fossil loaded and it dumped the conection.
Now when I go look at the PCB filer folder I see bbsbatch.bat file. So somehow I broker the logice of the bat files.

I delete the bbsbatch file and start qfront consoler and then try to connect and I get that PCBoard unexpected message.

Just chasing my tail right now.

--- QScan/PCB v1.20a / 01-0462
* Origin: Christian Fellowship | cfbbs.no-ip.com 856-933-7096 (1:266/512)

when I try again. Just same PCBoard message unexpected message.

Are you getting this message from qfront or pcboad?

--- QScan/PCB v1.20a / 01-0462
* Origin: Christian Fellowship | cfbbs.no-ip.com 856-933-7096 (1:266/512)

I think is is from qfront. the spawnbbs bat file does this on return
from door
--- Platinum Xpress/Win/WINServer v7.0
* Origin: WildCat Prison BBS, Mesquite Tx (1:124/5013)

I have Qfront connecting but when it tries to pass off the connection all I get is PCB console. It is like it doesn't know it is connected.

Have you had a chance to review my bat files?

Ruben Figueroa aka Zazz
Mystic Prison Board Sysop
telnet://pbmystic.rdfig.net:24
Web: www.rdfig.net

--- Mystic BBS v1.12 A48 (Windows/32)
* Origin: Mystic Prison*Mesquite Tx*pbmystic.rdfig.net:24 (1:124/5014)