1. Forum
  2. ILink
  3. IL HARDWARE

  • Network work-around?

    From Barry Martin@454:1/1 to All on Thursday, January 26, 2017 15:14:00

    Hi Folks!

    Haven't seen any answers to my original post about how to merge my two networks (192.168.0.x and 192.168.3.x). Basically looks like can't
    without some expense, so I'm thinking of a potential alternative. Right
    now need the two WiFi's as some of the old devices won't use the new
    protocol.



    Proposal:


    Some wireless devices
    /
    Wireless @ 192.168.0.1
    /
    DSL == Gateway Computer
    \ /
    Ethernet --- Computer
    º \
    º Computer
    º
    º
    ÈÍÍ Raspberry Pi === Other wireless devices
    192.168.0.15 192.168.0.200


    Raspberry Pi has a wireless dongle. Ethernet 'input' is 192.168.0.15. Proposed 'output' on the wireless side is 192.168.0.200. Theoretically
    now everyone is on the same network. RPi using Channel 6; the Gateway's wireless is set to roam.

    TIA!



    ¯ ®
    ¯ Barry_Martin_3@ ®
    ¯ @Q.COM ®
    ¯ ®


    ... If at first you don't fricassee, fry, fry, fry a hen.
    --- MultiMail/Win32 v0.47
    þ wcECHO 4.2 ÷ ILink: The Safe BBS þ Bettendorf, IA
    þ RNET 2.10U: ILink: Techware BBS þ Los Angeles, Ca þ www.techware.dynip.com

    --- QScan/PCB v1.20a / 01-0462
    * Origin: ILink: CFBBS | cfbbs.dtdns.net | 856-933-7096 (454:1/1)
  • From Mike Powell@454:1/105.2 to Barry Martin on Friday, January 27, 2017 18:03:00
    Raspberry Pi has a wireless dongle. Ethernet 'input' is 192.168.0.15. Proposed 'output' on the wireless side is 192.168.0.200. Theoretically
    now everyone is on the same network. RPi using Channel 6; the Gateway's wireless is set to roam.

    That was sort of what I was wondering... if you'd just be better off moving everything to 192.168.0.x. That sounds like something that would work.

    Mike

    ---
    # SLMR 2.1a # "I am EVIL Homer! I am EVIL Homer!" - Homer


    --- GTMail 1.26
    * Origin: ILink:CCO BBS * 502/875-8938 * capcity2.synchro.net (454:1/105.2)
  • From Barry Martin@454:1/1 to Mike Powell on Saturday, January 28, 2017 07:36:00

    Hi Mike!

    Raspberry Pi has a wireless dongle. Ethernet 'input' is 192.168.0.15. Proposed 'output' on the wireless side is 192.168.0.200. Theoretically
    now everyone is on the same network. RPi using Channel 6; the Gateway's wireless is set to roam.
    That was sort of what I was wondering... if you'd just be better
    off moving everything to 192.168.0.x. That sounds like something
    that would work.

    I'll have to try; to me sound slogical (everything 192.168.0.x) but then
    so did some stuff on 192.168.3.x and 'merging' via a setting in the
    gateway.

    If no other little quirkies pop up like they did yesterday wil probably
    try later today.


    ¯ ®
    ¯ Barry_Martin_3@ ®
    ¯ @Q.COM ®
    ¯ ®


    ... Does tomato paste fix broken tomatoes?
    --- MultiMail/Win32 v0.47
    þ wcECHO 4.2 ÷ ILink: The Safe BBS þ Bettendorf, IA
    þ RNET 2.10U: ILink: Techware BBS þ Los Angeles, Ca þ www.techware.dynip.com

    --- QScan/PCB v1.20a / 01-0462
    * Origin: ILink: CFBBS | cfbbs.dtdns.net | 856-933-7096 (454:1/1)